Keith Fenner

How to pull on your knockers! Part 1

Order: Reorder
Duration: 36:32
Updated: 23 Sep 2013

Starting out, with two pieces of stainless steel, add a lathe some welding and a little mill work and we create a device to pull on a (knocker), {what I called it, before knowing it was called a clapper} a Trolling Hammer Ring, which pulls the clapper against the inside of a bell. The original rings were forged or casted and we create our new S/S ring as a weldment, to replicate the old and the S/S was requested by the customer, to add life duration.

http://wn.com/How_to_pull_on_your_knockers!_Part_1

Jackshafting Part 1

Order: Reorder
Duration: 29:01
Updated: 05 Aug 2013

Jackshafting Part 1; Is not a video about Lathes, Mills, Drill Presses, welders, welding, Machining or PlasmaCAM or plasma cutting, in fact no fabrication or...

http://wn.com/Jackshafting_Part_1

Criterion & the R8

Order: Reorder
Duration: 13:32
Updated: 20 Sep 2013

We free up a frozen threaded sleeve in a Criterion boring head to install an R8 Shank support. Job sent to us from Wisconsin. A simple short video that I botched the intro but salvaged the rest. A peek at a test and trial part and a hint to the next video series under way.

http://wn.com/Criterion_the_R8

Handle It!

Order: Reorder
Duration: 29:46
Updated: 23 Aug 2013

Handle It! A sample of how I handle large heavy shafting in such a small shop, loading the lathes and Mill's with marine shafting. A quick tip on using the two wheel dolly. My take on cutting marine shafting key-ways.

http://wn.com/Handle_It!

It's all about Drilling

Order: Reorder
Duration: 53:06
Updated: 22 Jul 2013

It's all about drilling and I start off with making some long reach drills from the junk pile, show a few tips on how to make and keep your bits from grabbin...

http://wn.com/It's_all_about_Drilling

Two ways to Jive with Five

Order: Reorder
Duration: 62:26
Updated: 28 Jul 2013

Drilling a new five hole pattern in a pair of axles and brake drums. I use my Model K index head on the K&T; mill and jig bore the drums with them toe clamped...

http://wn.com/Two_ways_to_Jive_with_Five

Job Blending Part 1

Order: Reorder
Duration: 39:56
Updated: 29 Jul 2013

What looked to be just a couple of simple jobs, we could compare the two mills with became a small challenge to machine, a mix and match drive hub, on an old...

http://wn.com/Job_Blending_Part_1

Abused

Order: Reorder
Duration: 30:14
Updated: 27 Aug 2013

Abused ; A little welding, some machine work in the lathe and mill, getter done! The refurbishment of an end cap on a hydraulic cylinder! Whether it is the modified use of your equipment, or working on your projects with none of the right tools, sometimes it's both that cause the damages like these. Heads up on a new lathe and a announcement of giving a lathe away!

http://wn.com/Abused

American Crane

Order: Reorder
Duration: 14:57
Updated: 06 Aug 2013

Our customer has an oldie but goodie as they say when it comes to cranes, their old American Crane is missing a few components and we were asked to fabricate...

http://wn.com/American_Crane

Getting High Steering

Order: Reorder
Duration: 32:53
Updated: 30 Jul 2013

Getting High Steering; Off Roaders are always trying to get more ground clearance and this is one ways to get your steering up a little higher! My customer b...

http://wn.com/Getting_High_Steering

The Broken Beaver

Order: Reorder
Duration: 33:53
Updated: 16 Jul 2013

The Broken Beaver; A Vermeer 1800-A with a 110 HP John Deere, I Tech Motor W / Turbo, spinning a chipping drum a minimum of 2000 RPM's and the shaft breaks ...

http://wn.com/The_Broken_Beaver

Tub Grinding

Order: Reorder
Duration: 11:00
Updated: 04 Aug 2013

The Diamond Z 1463b, 12 ton hammer mill, brand new estimated cost just under a Million, 1200 HP. V12 Caterpillar, driving a 2:1 reduction to mill through 6 p...

http://wn.com/Tub_Grinding

The Bell Rung 300 P1

Order: Reorder
Duration: 71:37
Updated: 18 Aug 2013

Here is another project that starts out with a simple plan! This is part one of The Bell Rung 300 series. I share the first contact note from my customer! He...

http://wn.com/The_Bell_Rung_300_P1

1 / 6 The Million Dollar Rest! Mail Call

Order: Reorder
Duration: 32:32
Updated: 12 Aug 2013

The million Dollar Rest; this is a Mail Call project, sent to us by Tony Bonaviso, owner of Consolidated Machine & Welding, in New York, Tony has a 13" Le Bl...

http://wn.com/1_6_The_Million_Dollar_Rest!_Mail_Call

Fingering the Golden Castings

Order: Reorder
Duration: 50:39
Updated: 04 Jun 2013

A lot of bronze castings are brought into the shop for machine work to finish them off for their particular purpose. For some time now, I have been saving so...

http://wn.com/Fingering_the_Golden_Castings

It's how you look playing the game!

Order: Reorder
Duration: 33:08
Updated: 13 Jul 2013

We are all very competitive from time to time, it could be on a race track or two guys working side by side throwing around some testosterone, at least I kno...

http://wn.com/It's_how_you_look_playing_the_game!

Bling Fever

Order: Reorder
Duration: 42:31
Updated: 09 Aug 2013

Bling Fever is about fabricating a custom rod holder, that bridges over the top of a live well, tight against the house, to hold four 130 rods, while motorin...

http://wn.com/Bling_Fever

Jackshafting Part 5

Order: Reorder
Duration: 26:25
Updated: 08 Aug 2013

Jackshafting Part 5; Is not a video about Lathes, Mills, Drill Presses, welders, welding, Machining or PlasmaCAM or plasma cutting, in fact no fabrication or...

http://wn.com/Jackshafting_Part_5

Fat Chicks Only! continued

Order: Reorder
Duration: 76:57
Updated: 13 Aug 2013

Fat Chicks Only! Making the most from your PlasmaCAM, Millermatic 250, Miller Syncrowave 250, and a little bit of machine work on the Clausing lathe and Brid...

http://wn.com/Fat_Chicks_Only!_continued

Keith Fenner Gangam Style

Order: Reorder
Duration: 16:29
Updated: 25 Sep 2013

Keith Fenner Gangam Style This is for my friend machinist Keith Fenner. Thank you Keith for all great videos!

http://wn.com/Keith_Fenner_Gangam_Style

Abused Part 2

Order: Reorder
Duration: 31:42
Updated: 28 Aug 2013

Abused ; A little welding, some machine work in the lathe and mill, getter done! The refurbishment of an end cap on a hydraulic cylinder! Whether it is the modified use of your equipment, or working on your projects with none of the right tools, sometimes it's both that cause the damages like these. Heads up on a new lathe and an announcement of giving a lathe away! I give a glimpse at the Sheldon Lathe; I purpose to give away, to a student / apprentice, I'm paying forward to someone that wants to be in some kind of machining trade. Nothing better than practice and this is a great machine to get some hours on.

http://wn.com/Abused_Part_2

Super Shaker

Order: Reorder
Duration: 30:13
Updated: 18 Aug 2013

The Super Shaker; our customer is into sand &recycling; and one of their shakers shut down for some repairs and we were asked to do the machining for the hing...

http://wn.com/Super_Shaker

Belting & Lacing Part One

Order: Reorder
Duration: 35:57
Updated: 16 Aug 2013

Belting & Lacing Part One; I jump in with this video for two reasons, OK three reasons, one to finish a commitment of doing a video that was requested in the...

http://wn.com/Belting_Lacing_Part_One

Make changes yourself !

How to pull on your knockers! Part 1

Jackshafting Part 1

Criterion & the R8

Handle It!

It's all about Drilling

Two ways to Jive with Five

Job Blending Part 1

Abused

American Crane

Getting High Steering

The Broken Beaver

Tub Grinding

The Bell Rung 300 P1

1 / 6 The Million Dollar Rest! Mail Call

Fingering the Golden Castings

It's how you look playing the game!

Bling Fever

Jackshafting Part 5

See also [link]

http://wn.com/Keith

Make changes yourself !

How to pull on your knockers! Part 1

Jackshafting Part 1

Criterion & the R8

Handle It!

It's all about Drilling

Two ways to Jive with Five

Job Blending Part 1

Abused

American Crane

Getting High Steering

The Broken Beaver

Tub Grinding

The Bell Rung 300 P1

1 / 6 The Million Dollar Rest! Mail Call

Fingering the Golden Castings

It's how you look playing the game!

Bling Fever

Jackshafting Part 5

See also[link]

http://wn.com/Keith

See also [link]